PhD Workshop in Geodesign Technologies, August 26- 30 in Copenhagen

© University of Copenhagen and Echtzeit GmbH, Figure: The Rhino Sandbox. © IGN

Date: August 26-30, 2019

Venue: Department of Geosciences and Natural Resource Management of the University of Copenhagen

Tutors: Dylan Cawthorne, Patrick Moechel, Thomas Ott, Kane Borg, Rikke Munck Petersen, Anne Wagner, Lene Fischer, Hans Skov-Petersen, Pia Fricker, Mariusz Hermansdorfer

This PhD workshop, organized by the Department of Geosciences and Natural Resource Management of the University of Copenhagen, will address Geodesign Technologies to record, represent, translate, simulate, and communicate the real world in urban and landscape planning/design processes. The course goes beyond the classic methods based on physical models made from cardboard or clay and well-established digital techniques framed by 2-D GIS and 3-D CAD. The course aims to embrace, demonstrate and discuss new, emerging technologies via perceived world on the one hand, vs. its digital and physical representations on the other.

Rhino and Grasshopper will be used as design, modeling and simulation tools for geodesigners, landscape architects, architects, and engineers.

Students should be en engaged in landscape and urban design and related, spatial technologies (including GIS and CAD), but students specializing in one of the two fields are also encouraged to attend. To pass the course, students must:

• Read obligatory course literature
• Attend the course on site
• Provide a short, verbal reflection of their own PhD-project
• Present the design developed during the course (including technological observations)
• And finally, produce a 4-5 page manuscript covering the students’ reflection of their PhD project vs. the topics of the course

Detailed course program... 

Please enroll here...

Bamboo Office, project winner at the International Design Building Competition in China

The Bamboo Office, a project entirely designed with Rhino (2D+3D) and with an environmental analysis performed with Grasshopper, is one of the winners of the 1st International Design Building Competition promoted by the Chinese Sustainable Design Centre and the China New Building Materials Design & Research Institute. Barberio Colella ARC (Maurizio Barberio and Micaela Colella), in collaboration with Angelo Figliola, designed this interesting project in which architectural, bioclimatic, and environmental aspects converge.

The award-winning proposal features a double-skin facade surrounded by 15-meter tall bamboo plants to optimize the bioclimatic behavior of the building and reconnect employees with nature while working.

The building is part of a masterplan developed by the Chinese Institutions in which participants have been invited to design green buildings to showcase a new sustainable era for the future of China. The construction of all the winning entries will start in the next few months after the follow-up technical meeting.

More information here...

Level 2 Rhino 6 for Windows Online Course - June 2019

Rhino 6 for Windows Level 2 - Online Course

June 18-27, 2019

9 AM-1 PM PDT

US$250 - Register here!

In this advanced two-week class, you will learn to take advantage of Rhino's most advanced features. You will also learn tips and tricks for making high-quality models faster and easier. 

Dates: 

• Tuesday-Thursday, June 18-20
• Tuesday-Thursday, June 25-27

All times listed are Pacific Daylight Time (PDT). Calculate your time zone. 

Details and sign up here! 

Advance your Rhino skills by attending this live, online training with instructor Pascal Golay. Pascal is a technician at Robert McNeel & Associates and frequently posts to the Discourse Support Forum. Homework is encouraged, but optional. All sessions will be recorded posted for your study and review. If you cannot make a session, you will be able to catch up at your convenience.

What you need for the class: 

• Rhino 6 for Windows software installed. The instructor will be using this version.
• Rhino 5 for Windows and Rhino for Mac are not recommended.
• A stable and fast Internet connection. 
• A headset/microphone combo. 
• See the outline of class topics.

Neckar Footridge proposal in Heidelberg by SPANS Sterling Presser

A new architectural landmark in the Heidelberg landscape and history

The new cyclist and pedestrian bridge offers more than a supporting structure. It becomes a new vitalizing infrastructure within Heidelberg, creating a new sense of space and brings the coexisting areas into a new context. The 600m infrastructure is a succession of urban situations: parks, side streets, short narrow passages, and wide riverside promenades. The bridge acts as an urban connector and unifier, creating an efficient and smooth connection between places to revitalize.

The bridge is constructed as a monocoque that flows. Its seamless and multifaceted form contributes to the abstraction of the entire design. The main geometry refers to Gothic elements from the Holy Spirit Church creating multiple layers that peel. The ramps form branches created from the main trunk. The bridge becomes a sculpture that reflects its surroundings and is also reflected in the water above the Neckar. It opens a new poetic dimension. The bright rose color is reminiscent of the main lights and shadows of the city. The rhythm of the bows swings with the old bridge. Each "infrastructure instrument" plays its own music and follows its own path.

Rhino and Grasshopper were extensively used in modeling and projection.

Title: Cyclist and Pedestrian Footbridge Over the Neckar, Heidelberg, Germany
Date: 2019.
Client: City Heidelberg, Germany.
Architect: SPANS Sterling Presser. Team Design lead, Nicolas Sterling / Elke Sterling Presser
Assistant Artemis Koumparelou.
Engineer: Adao da Fonseca Engenheiros Consultores Lda. Team, Antonio da Fonseca, Renato Bastos.
Landscape: A24 Landschaft. Team: Jan Grimmek, Steffan Robel, Nikos Orfanidis, Joshua Kirk.
Rendering: GRAUVISUALS, Ioannis Efstathiou.
Stage: Invited competition.

Complete project details...

CounterSketch and Rhino for jewelry design

CounterSketch is a 3D design software solution for jewelry sales. It offers a wide range of customizable styles and Stuller ordering options. It has a revolutionary system that allows the seller to create a customized piece for any customer.

iCreatia, Authorized Rhino Reseller, is organizing a free Countersketch + Rhino webinar in Spanish. During the session, they will teach you how to design a piece and how to prepare an STL file for 3D Printing.

More information and registration here...

Proving Ground now has a podcast!

Check out Proving Ground's podcast! The first one features Nate Millar, Dave Stasiuk, and Kristen Schulte discussing recent AEC technology news. Get their take on hype versus reality in the generative design trend in architecture, and a little discussion of Rhino.Inside and Grasshopper.

See and listen to Prove It - Episode 1: Generative What?

You can also move on to the second podcast Episode 2 - Big Ship Computation with Matt Goldsberry

AA Visiting School New York

AA Visiting School New York

July 10-19, 2019

Hosted at The Cooper Union in New York City

AA Visiting School (AAVS) is coming to New York. This program will focus on digital and scripted design methodologies, realized through digital representation and fabrication techniques. Each tutor will introduce their own methods of working within the platforms of Rhino, Grasshopper, Python, and Maya.

This Visiting School will explore emerging possibilities in advanced architectural design and urban futures. This endeavor not only hopes to reveal a glimpse of what the city could be but also start a discourse to offer future urban solutions to the changing landscapes of our metropolises around the world.

In the studio workshops, student groups will produce an urban proposal driven by new, advanced computational techniques.

Morning presentations and evening public lectures will be presented on topics relevant to the workshop agenda, offering exposure to a wide range of methodologies and applications used by the instructors and guest speakers in their practices. 

With its ever‐increasing densification and redevelopment, as well as the growing diversity of its cultures, New York is one of the best locations to witness an evolving city. AAVS New York will offer site visits to several prominent buildings that have shaped and influenced urban habitation.

To conclude the program, a public event will be held to present final group projects and lead into a discussion session covering future urban growth within New York and using computational methodologies to address the issues impacting contemporary urban systems.

Interested? The application deadline is June 15, 2019. More information...

Intermediate Grasshopper Online Training, June 2019

Intermediate Grasshopper Online-McNeel Online

June 10-13, 2019

9:00 AM-12:30 PM each day (PDT)

US$205

Instructor Andres Gonzalez will explore the intermediate concepts of generative modeling in Rhino using Grasshopper. He will apply these concepts to Grasshopper design and development in numerous real-life examples with you.

This course is for design professionals looking to learn concepts and features of Grasshopper at an accelerated pace in an instructor-led online environment. 

You will need one of these:

• Rhino 6 for Windows, which includes Grasshopper
• Rhino 5 for Windows and the free Grasshopper plugin
• Rhino for Mac, which includes Grasshopper

Rhino 6 for Windows is recommended, and it will be used by the instructor in the training. Students are welcome to use Grasshopper for Mac. Differences between the platforms are minor and will be discussed. All sessions are recorded for your review after the training.

View the course outline.

Prerequisite: This course requires Intro to Grasshopper training or equivalent. 

Designing Jewelry for Manufacturing webinar

Free webinar: Designing Jewelry for Manufacturing

Join us on Thursday, June 6, 2019
9:00 AM-11:00 AM PDT
All times listed are Pacific Daylight Time (PDT). Calculate your time zone. 

Discover the potential of Rhino 6 for jewelry design with a focus on manufacturing.  Gary Dawson, ART and owner of Gary Dawson Designs, will demonstrate how Rhino 6 can supercharge the jewelry design and fabrication process.

Topics will include:

• Details about Gary's use of Rhino 6 in his jewelry design business. 
• Live presentation using Rhino 6 to design a ring. 
• Tips and tricks for using Rhino 6 will be highlighted along the way. 
• Live questions and answers during the webinar.

Get more details and sign up for this webinar!...

Gridopolis Games wins IDA awards

The International Design Awards (IDA) recently announced the winners of its 12th annual design competition. Each year, the IDA competition receives thousands of designs submitted by companies and designers from over 90 countries, all competing for the top prizes in this prestigious award. These awards recognize, celebrate, and promote legendary design visionaries, uncovering emerging talent in design.

SchultzeWORKS designstudio's Gridopolis Games received Gold honors in two toy design categories:  Educational Toy and Board Game.

SchultzeWORKS designstudio is using Rhino extensively for its innovative startup company, Gridopolis Games.

Gridopolis Games is a game-design laboratory founded by Dave Schultze to break the mold of traditional board games by challenging gamers to think creatively and strategically in three dimensions.

Gridopolis Games is now on Kickstarter!

More information on Gridopolis Games and the awards....

BIM BOP 2019! An all day BIM conference at USC

The 13th Annual BIM BOP Conference is scheduled for Friday, June 28, 2019, at the USC School of Architecture.

Past events have focused on the rise of BIM in the AEC industry, sustainable design and BIM, fabrication and construction, analytics, parameters and customization, practical BIM, future BIM, visual programming, and other exciting topics. There have been several conference proceedings and a book that resulted from presentations at these summer events.

Registration for the all-day BIM conference is at USC, Friday, June 28, 2019, at the USC School of Architecture. 

More information and to register...

IAAC Global Summer School 2019 - Becoming

The Institute for Advanced Architecture of Catalonia (IAAC) is launching the Global Summer School 2019 - Becoming, the 12th edition of the international summer educational program about the future of our cities. It takes place in Barcelona and in other nodes worldwide simultaneously July 1-14, 2019.

The Global Summer School is a platform defined by ambitious, multiscalar investigation on the implications of emergent techniques in our planned environments. Each year, international teams located in key cities around the globe explore a common agenda with projects deeply embedded in diverse local conditions. Because of this, participants have an international laboratory to test their design hypothesis, understanding how design conclusions derived locally can be tested and evolved globally in different cities where other teams live.

This intensive two-week workshop connects each participant to ongoing research agendas in robotics, simulation, physical computing, parametric design, digital fabrication, and other relevant emerging design methodologies. Specific emphasis is placed on understanding and creating critical research advances in the application of new technologies in design and architecture.

Nodes for Global Summer School 2019 - Becoming edition are: Barcelona, Quito, Pune, New York, Budapest, Monterrey, Shanghai, Melbourne, Tehran, Beirut, Manila, Istanbul, Hong Kong, and Dubai.

The previous edition, Global Summer School 2018 - Digitize, brought together more than 160 international participants, becoming a great success as a reference summer educational program for Barcelona in the field of cities.

To learn more about the Global Summer School 2019 - Becoming, please visit the IAAC Global Summer School Official website:

http://globalschool.iaac.net/
https://www.instagram.com/iaac.gss/
https://www.facebook.com/iaacgss/

Online workshop on Hull Design - June 1-23, 2019

The Association of Naval Engineers of Ecuador (CINAVE) has organized an online course of 24 hours on modeling boat hulls. Dates are June 1,2,8,9,15,16,22 and 23.

The course is divided into eight live classes, lasting three hours each, through the CINAVE platform. During the course, you will see how NURBS curves and surfaces work and a total of six different models of hulls from scratch and step by step.

Language: Spanish

Details and registration (in Spanish)...

Open position: C# Developer for Grasshopper in Bremerhaven, Germany

ELISE, Generative Engineering, is looking for a C# Grasshopper Developer:

We are convinced that the way we develop technical products today will change fundamentally. Engineers will no longer design and compute parts by hand in the future—they will develop solutions for automated design in close collaboration with computer and intelligent algorithms.

We are changing the way product development works and are looking for a full-time C# Software Engineer (m/f/d) in Bremerhaven. Do you want to join?

What you'll be working on

As a software engineer, your job is the development of functions that create or modify geometry. You will be collaborating with mechanical and software engineers to develop the next generation of generative engineering software. You will be actively participating in the research and implementation of algorithms perhaps never before used in the industry as well as influence the design of ground-breaking user interfaces to drive them.

What you should know

• Proven experience in C# (or in similar languages)
• Proven experience with using RhinoCommon
• Strong geometry/mathematics background
• Experience solving complex computational geometry problems
• Experience with git
• Knowledge of C++ desirable
• Interest in artificial intelligence preferable
• A passion for robust development practices including test-driven development continuous integration and agile methodologies
• Excited to work in a fast-paced, team-oriented environment

Why ELISE

As a startup, we revolutionize the design process for 3D printing with our software. Do you love to work on cutting-edge projects for the automotive, aviation, and space industries? Sounds as you might fit in our great team!

We are proud of our team—our people are excellent in what they do. We offer an exciting and varied work in the interdisciplinary field with a lot of creative freedom in a small, enthusiastic team. We care about personal growth and invest in the development of our employees. Together with you, we want to perfect our software and position it in a fast-growing, exciting market.

Is it you, you just read about? Apply now!hr@elise.de | +49 471 4831 1365 | www.elise.de

Design Fair 2019 - Colombia

Rhino3DColombia invites you to join their workshops at the Design Fair 7th Edition in Medellín, Colombia. All three workshops are offered at no extra cost to the Fair's ticket. 

Workshop 1: Time and Materials Matter
Learn to use digital tools in order to optimize the use of the materials.

Date: Friday, May 31, 2019
Time: 10 AM-2 PM
Instructor: Jose Ovidio Cardona


Workshop 2: Folding Design, Projection of Forms and Construction of Surfaces
An academic space for design, digital fabrication and formal experimentation of folded surfaces.

Date: Saturday, June 1, 2019
Time: 10 AM-2 PM
Instructor: Julian Oquendo


Workshop 3: Visualization of Interactive Facades with Grasshopper and V-Ray
Learn to use visualization tools to present architectural projects models with Grasshopper.

Date: Sunday, June 2, 2019
Time: 10 AM-2 PM
Instructor: Jacobo Gonzalez

For more information please contact Andres Franco.

What is RhinoFabStudio? A RhinoFabStudio™ (fabrication studio) is a small-scale digital workshop, certified by McNeel, with an array of Rhino and Rhino compatible software and computer controlled tools and training. These tools cover the various leading-edge industrial methods and materials needed to design, analyze, and fabricate almost anything.

FABRICATE 2020 (London, UK) - Call for Work

FABRICATE is an international peer-reviewed conference with a supporting publication on the theme of digital fabrication. Discussing the progressive integration of digital design with manufacturing processes, and its impact on design and making in the 21st century, FABRICATE brings together pioneers in design and making within architecture, construction, engineering, manufacturing, materials technology, and computation.

Discussion on key themes includes: 

• How digital fabrication technologies are enabling new creative and construction opportunities from component to building scales
• The difficult gap that exists between digital modeling and its realization
• Material performance and manipulation
• Off-site and on-site construction
• Interdisciplinary education
• Economic and sustainable contexts

FABRICATE 2020 will be co-chaired and co-organized by the Swinburne University of Technology, College of Architecture, Art, and Planning at Cornell University and The Bartlett School of Architecture, UCL.

For 2020, FABRICATE is returning to its birthplace, the Bartlett School of Architecture, UCL where substantial transformation in size, scope, and outlook has occurred in recent years including the completion of the deep retrofit of its main building at 22 Gordon Street. The project, designed by Hawkins\Brown, doubled the available space. The building now provides over 1,200 students and 400 staff with cutting-edge facilities, including open-plan studios, exhibition spaces, and the workshop known as Bmade (The Bartlett Manufacturing and Design Exchange).

FABRICATE 2020 Call for Work...

McNeel Europe collaborates in H2020 project -V4Design

McNeel Europe is collaborating in Horizon 2020 research projects funded by the European Commission. The project V4Design repurposes existing multimedia content (images, videos) by developing novel approaches for 3D reconstruction and 3D modeling.

For Rhino, McNeel will develop a 3D objects library from 3D reconstruction enhanced with semantics, explanatory text descriptions, and textures. This library will be integrated with Rhino and Unity to inspire the design, architecture, as well as 3D and VR game industries.

Consortium partners are from academia industries.

Become a member of our test user group here... 

Continuing Professional Development Course in Digital Design and Fabrication of Timber Plate Structures- August 15 (Sydney)

Date: Thursday, August 15, 2019

Location: The School of Architecture, Design and Planning, The University of Sydney, 148 City Rd, Darlington, NSW 2008

Workshop: 4:00 PM–6:00 PM

Public Lecture: 6:30 PM–7:30 PM

Tutors: Jun. Prof. Dr. Christopher Robeller, Eduardo De Oliveira Barata

This 2-hour continuing professional development course and 1-hour public lecture will introduce participants to computational design strategies for cutting-edge timber building technologies, including digital fabrication of integral timber joints and closed-loop digital design workflows for timber plate structures.

Traditional wood joinery techniques have been successfully employed for hundreds of years in the construction of tall timber structures. Due to a resurgence in mass timber construction and a proliferation of CNC fabrication machinery, these integral joints are again an economical and performative way to construct timber buildings.

When appropriately designed, integral joints introduce many structural and constructability benefits. These include greater control over part tolerances and mechanical behaviors, self-aligning and self-locking features for faster assembly, and reduced part production cost through optimization of material use and CNC fabrication time.

Such benefits can only be realized with a high degree of coordination between the designer, fabricator, and builder. This course will allow participants to develop the skills required to achieve such coordination and deliver cutting-edge, digitally-integrated timber buildings.

Registration...

Rhino Training in Dubai

Join Rhino Authorized Trainer José Carrillo all Saturdays in June in Techarc Dubai for a Rhino Level 1 training with a special emphasis on digital design and fabrication.

More details and registration...

Digital Design and Production in Architecture workshop by INDEXLAB in Milano - July 1-13, 2019

The workshop Digital Design and Production in Architecture, organized by INDEXLAB – Politecnico di Milano (July 1-13, 2019), offers a new vision on architecture and its manufacturing methodologies.

While 20th Century architecture focused on mass production and serial repetition of its components, architecture today is characterized by unique elements, industrially produced through advanced CNC fabrication machines. At the same time, the rise of novel programming platforms for design makes it possible to generate processes and algorithms to control form and technological aspects from the first conceptual stages of the design until the construction phase. This makes it possible to integrate aesthetics and functionality, structural resistance, and energy performance within one coherent design process.

By defining such design to production workflow, both fabrication and material limits and potentials play a crucial role in generating competitive logical construction systems. Robots and CNC machinery contribute to the redefinition of design methodologies and construction processes, transferring most of the manufacturing from the building site to industrial production, where advanced components, integrating structure and envelope, can be designed and fabricated into complex solutions with high aesthetic and functional value.

The workshop aims to bring together visionary companies, advanced designers and innovation-oriented students to envision new synergies between academic research, architectural practice, and industrial production.

Complete details and registration...

Rhino for Jewellery Design training in London - June 7, 14 and 21, 2019

This Rhino for Jewellery Design training by SimplyRhino UK is intended for those who currently work professionally or wish to work professionally in fine jewellery design, but who are relatively new to Rhino NURBS modeling software in a jewellery design context. 

The course is taught at SimplyRhino UK's Certified Rhino training centre in London.

The class takes place over three consecutive Fridays. The next 3-day class starts on Friday, June 7 and continues on Friday, June 14, and Friday, June 21, 2019 (09:30 to 17:30 each day).

Details and registration...

Recorded Webinar by Car Body Design: Designing 3D Patterns with Rhino and Grasshopper

Novedge Webinar: Designing 3D Patterns with Rhino and Grasshopper from Novedge on Vimeo

Marco Traverso is an engineer, developer, and 3D designer/consultant with over 18 years of experience with Rhinoceros. In the past seven years, he has developed workflows and tools for integrating the parametric capabilities of Grasshopper into creative concept design pipelines. His published work is visible at MarcoTraverso.it. Marco is the founder of Car Body Design, a leading website on transportation design since 2004.

One of the strengths of Grasshopper, the visual programming tool for Rhino 6, is the natural ability to process complex geometry data. For this reason, one of its most interesting applications is the creation of elaborated 3D patterns and textures, which are being used more and more in architecture, as well as in product and industrial design. 

This webinar gives an overview of different design strategies and workflows used to develop a library of reusable patterns.

Master in Parametric Design by Controlmad - Madrid

September 9-December 4, 2019

Controlmad Advanced Design Center

Avda. del Manzanares, 166-168

28019 - Madrid (Spain)

From September to December 2019 Controlmad Advanced Design Center (ARTC and RhinoFabStudio) will host the XI edition of their Master in Parametric Design.

This study program specializes in parametric design and digital manufacturing in industrial design, product design, architecture, engineering, interior design, digital fabrication, and related fields, through the creation of physical parametric models and prototypes using as the main tools Grasshopper, Rhino and Controlmad CNC machines (laser, 3D printers, milling machine…)

The course is divided into five groups with several units. The aim of every unit is that students can learn new parametric tools based on Grasshopper.

• Group I - NURBS modeling with Rhino, Paneling Tools and Grasshopper

• Group II - Digital fabrication (visits to outstanding parametric buildings)

• Group III - Meshes modeling (Grasshopper for organic design, structural analysis and form finding)

• Group IV - Interoperability (Grasshopper and its connection with Arduino, sensors, data from the Internet, Python)

• Group V - Thesis (individual work on the main interests of the student based on the previous units + V-Ray for rendering)

Early bird registration until May 8th, 2019

More information...

How Rhino is helping preserve shipping history

Diagram of Viking shipwreck by Massimiliano Ditta

Rhino is now working in marine archaeology!

At Mecklenburg-Western Pomerania, Germany, port renovators discovered several shipwrecks on the harbor seafloor. It was an exciting discovery as the wrecks' timber were almost perfectly preserved, with practically no bacteria or rot, and no woodworms, as the silt environment was so anaerobic.

One ship was a flat bottom ship. Another was a strong cargo ship with a square sail, built to transport heavy loads around the Baltic Sea region. The third shipwreck was a pointed, Viking-style ship.

3D scanning the Viking shipwreck

A team of specialists had to work fast to preserve the details and document the shipwrecks. The formerly silt-covered timbers were now exposed and vulnerable to damage. After lifting the wreck from the harbor floor, the team needed to clean, scan, process, describe, annotate, and photograph 228 timbers—in one year.

Every day, seven timbers were prepped for scanning. Two of them were patted dry and scanned one at a time. The remaining five others would wait under wet cloths, as exposure to dry air would cause the timbers to buckle and rupture.

All four sides of each timber were scanned with the professional 3D scanner, Artec Eva. The scans were processed and turned into full-color textured meshes in Artec Studio.

From there, the scans were exported as OBJ files to Rhino 5 for annotation. 

Maritime archaeologist and 3D recording specialist Thomas Van Damme of Ubi3D explained the process, “In Rhino, each characteristic of the timber was fully annotated, via the PolylineOnMesh feature, stored on separate layers, in precisely the location where it was found on the wood. These notes included details on every cut and chop mark, all the nail holes, each and every little scratch, the wood grain itself, what kinds of nails were used, whether they were iron nails or wooden treenails, which tools were used for construction, if there were signs of repairs made, what kind of wood was used.”

“In the past, all edges of timbers had to be traced using a contact digitizer which was very time-consuming. The nice thing in our approach is that Rhino has tools which automatically convert the annotated scan into a technical drawing. So, the 2D line drawings are essentially generated automatically from the annotated scans, without us having to trace all the timber outlines.”

The results produced valuable information for both research and education.

See the details of this project from Ancient Origins ...

Open call for artists in Horizon 2020 project MindSpaces

McNeel Europe is collaborating as a consortium partner in MindSpaces, a 3-year research project funded by Horizon 2020 and financed by the European Commission STARTS/Lighthouse projects.

To encourage the collaboration of research projects and artists, STARTS funds residencies of artists in tech institutions and scientists or technologists in artist studios. MindSpaces will offer a limited number of residencies for a period of 6 to 18 months. Accepted applicants will become part of the MindSpaces research team. 

The residency is open to artists of all types and experience, but preference will be given to those whose practices have previously engaged with science, emerging technologies, interactive installations, AR/VR installations, architectural design, or art in public spaces. Successful applicants will receive a lump sum of 30-60,000 euros max for min 6 to max 18 months that includes travel and material budgets.

In this project, Rhino and Grasshopper will be used as a platform to interact and develop parametric and virtual 3-D indoor and outdoor environments driven by art and behavioral data. Neuro-feedback collected from test individuals will provide information about space usability, comfort and functionality testers perceive in VR. 

For more information about the call visit the call page on the MindSpaces website. 

Applicants can register and submit their proposals here...

Grasshopper Masterclass at Total Chaos (Sofia, Bulgaria) - May 16, 2019

Join hundreds of 3D artists, designers, and developers in a global gathering in Bulgaria’s capital this May. A host of inspiring talks by world-class artists, hands-on masterclasses and certification opportunities promise to make Total Chaos 2019 another truly unforgettable experience.

Total Chaos runs May 16-18, 2019, at Sofia Tech Park. Masterclasses and V-Ray certification opportunities are on May 16, followed by two packed days of presentations and sessions, May 17-18.

On May 16 there will be a Grasshopper Masterclass, Reimagine The Future of Design. 

Description: There are infinite possibilities when we unite parametric design with the beauty of photorealistic rendering. Advance your Rhino and Grasshopper skills in architecture, product design, automotive, and every aspect of parametric design.

Presentations include:

• Introduction to Parametric Workflows – Jordi Arcas, McNeel Europe
• The Renaissance of Parametric Jewelry Design – Jan Kokol, CEO & Founder, IMAGO Design
• Architectural Daylight Data Rendering with V-Ray and Grasshopper – Carlos Bausa Martinez 
• Advanced Parametric Modeling – Margarita Valova, Associate, Zaha Hadid Architects

Complete details and registration (with 20% off until May 7!)...

Non Architecture - Re-Draw Competition - Casa da Música

Designers have always used drawings to communicate their ideas to the rest of the world. Drawings were considered a communication medium, used to represent abstract concepts and bring them closer to reality. It was a primordial effort of giving a shape to thoughts and narrate concepts visually.

In the digital age, where content and images dominate our daily life, the relationship with visual content drastically changes when it comes to architecture. Renown buildings are often photographed, Instagrammed, shared as a passive portrait of what architecture can look like. It's to the point that some designers design for more photogenic buildings. The result is a media-oriented image of architecture, often portrayed online by various users from the same angle, following the trending aesthetics and styles. What used to be a moment of creation, tends to become today a passive exercise of pure repetition. 

Based on this paradigm, the competition series wants to encourage representation as a proactive exercise, and engage the public in rediscovering a given building, an architectural icon, proactively researching a new image, a new way to portray it, by being creative, critical and innovative.
  
Casa da Música by OMA—the Porto Concert Hall—is the first building selected for the RE-DRAW competition series.

The “Re-Draw” competition aims to develop one visual to ‘represent’ an iconic architecture.

The participants are asked to draft one image, with absolute freedom of scale, technique, and level of abstraction.

We encourage creativeness, criticality, and innovation.

Complete details...

RESHAPE19| Cognified Matter competition

Reshape invites all Rhino users to take part in the 5th edition of its competition: 

Reshape19| Cognified Matter focuses on future applications of Wearable Tech and Smart Products, inviting creative minds to predict new trends, elaborate on novel solutions, and recalibrate existing markets in the direction of more sustainable models. 

Reshape V edition will shortlist three winners, from the Wearable Technology and Smart product category.  Additionally, two honorable mentions will be nominated for each category. The first winning designers will be awarded two scholarships* (value: 6.500 Euro) for the Design for Wearables postgraduate at IED Barcelona, and a monetary prize up to 1,000 euros.

All selected talents, winners and honorable mentions will have the chance to participate in Reshape Forum, with a free ticket pass at INDUSTRY From Need to Solution Event. At the Reshape Forum, designers will meet relevant industry leaders, presenting their proposals to the INDUSTRY and Reshape audience. Additionally, shortlisted projects will be showcased at the Reshape Exhibition.

*100% Scholarship program for the Wearable technology category 1st winner, 50% Scholarship program for the Smart Product category 1st winner. The inscription fee is not included.

Complete details...

Construction of Buildings with Python + Rhino and Grasshopper Workshop

Universidad de los Andes in Columbia invites you to join their workshop on the Construction of Buildings with Python + Rhino and Grasshopper. 

The workshop is designed to introduce architects, engineers, and other professionals to the design and construction of buildings with the programming tool, Python + Rhino and Grasshopper. The main goal of the workshop is to develop the technical knowledge and skills in programming to generate, change, and exchange constructive technical information. Develop a theoretical-practical knowledge of how software tools are structured and operated, combined with critical thinking.

Register now!

Dates: 
May 7-June 1, 2019

Schedule: 
Tuesdays, Wednesdays and Thursdays 6 PM to 9 PM
and Saturdays from 8am - 12pm

Time: Monday and Wednesday from 6 PM to 10 PM

Place:
Universidad de los Andes, Colombia

Fee: 
$2,700,000 Colombian pesos through April 22 
$2,970,000 Colombian pesos through May 3

For more information please visit this link.

What is a RhinoFabStudio? A RhinoFabStudio™ (fabrication studio) is a small-scale digital workshop, certified by McNeel, with an array of Rhino and Rhino compatible software and computer-controlled tools and training. These tools cover the various leading-edge industrial methods and materials needed to design, analyze, and fabricate almost anything.